Automatic material mixing system using FBD Programming language

Automatic material mixing system using PLC(S7-1200 FBD).

 

This is PLC Program for automatic material mixing system using PLC.

 

Problem Description:-

We need to mix two material (material 1 and material 2). Provide separate switch for each material. And also provide facility for mixed material for the same. Write FBD diagram logic for the application.

 

Problem Diagram

Problem Solution

For explanation we are able to think about straight forward example of mixing system. During this application pure unmixed material is ready by the action of SW S1 and S2.And mixed material is ready by the action of SW3.

Operator watches the extent of the tank and he will discharge tank by the discharge valve and we keep the mixer motor ON whereas tank is being filled. We are going to give interlock system thus user cannot operate each switch at same time.

Program

Here is PLC program for Automatic material mixing system using PLC.

List of inputs

SW 1:-I0.0

SW 2:-I0.1

SW 3:-I0.2

Mixer trip:-I0.3

List of outputs

Material valve 1:-Q0.0

Material valve 2:-Q0.1

Discharge valve:-Q0.2

 

FBD diagram for the automatic material mixing system using PLC

Program Description:- 

In network 1 we used NO contact of SW1 (I0.0) and NC contact of SW2 (I0.1) and NC contact of SW3 (I0.2) in series. By activating SW1 operator can START the valve for material 1

In network 2 we have taken NO contact of SW2 (I0.1) and NC contact of SW1 (I0.0) and SW3 (I0.2) in series. By activating SW2 (I0.1) operator can START the valve for material 2.

In network 3 mixer motor will START when one of the valve is running out of two valves. If there is some fault in motor then motor will not start.

Note:-Application is only for learning and educational purpose .Above application may be different from actual application. This application can be done in other PLC also. Users are responsible for correct operation of the PLC system and for any possible injuries and or material damages resulting from the use of this program. It is necessary to take care of safety during implementation, installation, maintenance and operation.

 All parameters and graphical representations considered in this example are for explanation purpose only, parameters or representation may be different in actual applications. Also all interlocks are not considered in the application.

Automatic material mixing system using PLC using Ladder Language

Automatic material mixing system using PLC.

 

This is PLC Program for automatic material mixing system using PLC.

 

Problem Description:-

We need to mix two material (material 1 and material 2). Provide separate switch for each material. And also provide facility for mixed material for the same. Write ladder diagram logic for the application.

Problem Diagram

Problem Solution

For explanation we are able to think about straight forward example of mixing system. During this application pure unmixed material is ready by the action of SW S1 and S2.And mixed material is ready by the action of SW3.

Operator watches the extent of the tank and he will discharge tank by the discharge valve and we keep the mixer motor ON whereas tank is being filled. We are going to give interlock system thus user cannot operate each switch at same time.

Program

Here is PLC program for Automatic material mixing system using PLC.

List of inputs

SW 1:-I0.0

SW 2:-I0.1

SW 3:-I0.2

Mixer trip:-I0.3

List of outputs

Material valve 1:-Q0.0

Material valve 2:-Q0.1

Discharge valve:-Q0.2

 Ladder diagram for the automatic material mixing system using PLC

Program Description

In network 1 we used NO contact of SW1 (I0.0) and NC contact of SW2 (I0.1) and NC contact of SW3 (I0.2) in series. By activating SW1 operator can START the valve for material 1

In network 2 we have taken NO contact of SW2 (I0.1) and NC contact of SW1 (I0.0) and SW3 (I0.2) in series. By activating SW2 (I0.1) operator can START the valve for material 2.

In network 3 mixer motor will START when one of the valve is running out of two valves. If there is some fault in motor then motor will not start.

Note:-Application is only for learning and educational purpose .Above application may be different from actual application. This application can be done in other PLC also. Users are responsible for correct operation of the PLC system and for any possible injuries and or material damages resulting from the use of this program. It is necessary to take care of safety during implementation, installation, maintenance and operation.

 All parameters and graphical representations considered in this example are for explanation purpose only, parameters or representation may be different in actual applications. Also all interlocks are not considered in the application.

Step-by-Step Guide to Writing Your First PLC Program

Step-by-Step Guide to Writing Your First PLC Program

Writing your first PLC (Programmable Logic Controller) program may seem challenging, but by following a structured approach, you can create a working automation system. Here’s a step-by-step guide to help you get started.

1. Understand the System Requirements

Before programming, identify what your PLC system needs to do. Define the input and output devices:

• Inputs: Sensors, switches, or buttons (e.g., start/stop buttons).
• Outputs: Motors, lights, or valves (e.g., turn on a conveyor belt).

Example task: Turn on a motor when a start button is pressed and stop it when a stop button is pressed.

2. Select the Right PLC and Software

Choose a PLC that fits your application. Popular brands include Siemens, Allen-Bradley, Mitsubishi, and Omron. Use the manufacturer’s programming software (e.g., Siemens TIA Portal or RSLogix 5000).

3. Design the Logic

Plan your logic using Ladder Logic, the most common PLC programming language. It visually represents electrical circuits, making it easier to understand.

For the motor control example:

• Input 1: Start button (I0.0)
• Input 2: Stop button (I0.1)
• Output: Motor (Q0.0)

4. Write the PLC Program

Open your PLC software and follow these steps:

1. Create a new project and select your PLC model.
2. Define inputs and outputs in the I/O table.
3. Write the ladder logic:
   • When I0.0 is pressed, latch Q0.0.
   • When I0.1 is pressed, unlatch Q0.0.

5. Download and Test the Program

1. Connect to the PLC via USB or Ethernet.
2. Download the program to the PLC.
3. Run the system and verify its operation.