S7-1200 PLC configuration,example creation,monitoring and downloaiding in the PLC.

S7-1200 PLC configuration,example creation,monitoring and downloaiding in the PLC.

First, we arechoosing TIA Portal V13 from our Start Menu anddouble click and open the program.

Here is our portalview. Now we need to choose Create new project icon. You can change yourproject name alsoyour path and you can add yourcomments. And clickthe create button.

 We completed Start section. Now we need to configure our device. First clickconfigure a device.

Choose  add  new  device. And  click  SIMATICS7-1200  CPU  its  model  and type respectively. Your  CPU type  can  change from  one  to  another. So  you  need  to control on your PLC Training Set. Its  CPU panel willgive needed information to you. When  you   are   confident  to  select  true choice. Click  add  button. And  go  on.

The  CPU  added. You can see at the following figure.Now  choose  Program blocks and clickdouble Main [OB1].

Here is the LADDER diagram window. Now we are ready to add our operations such as bit logic, timer,counter,comparator etc.We will use Basic Instructions part

Its label will be START button. We will adjust its label and adress.

Click right button on mouse. And choose Define tag.

Specify your information and click the Define button. Start button’s name is I0.0

 

Do the same thinglike START button withSTOP button. Stop button’sname will be I0.1 This is your choice.You have no constraints on it.

Now double click Add new block. Because we need Timer for our problem.

 /////////////////////////////////////////////////////////////////////////////////////////////////////////////
Choose  Data Block. FromType, so you  can   choose whatever  you  need. Andwe 
 choosed  IEC_Timer. And click OK.

Our Data_block_1[DB1] is  added. Double  clickMain [OB1] and  turn  back our LAD diagram.

Add TON timer relayfrom Basic Instructions isselected. And clickunknown information on and under the timer. Our time is milisecondat our programme. You need to giveattention. Also we will giveits label ‘’Data_block_1’’. Youcan see our explanations at the following figures.

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Now we need to use Network 2.

 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Add new button. Its our timer’s output contact.

___________________________________________________________________
We will add output coil. Its label will be MOTOR.

______________________________________________________________________________

Click  right  with  Mouse  and  specify  its  properties  and  click  Define  button  again.

This iconis downloading our program to CPU.Also you knowMain[OB1] is interface between PC and CPU. Clickdownload icon and continue.

Choose PN/IE and Intel® 82579LM Gigabit Network Connection. And click theStart Search button.

Search is completed. Choose PLC_2 device and click the Load button.

Choose  Stop all  and  click Load  again. And  then  click  Finish  button. Finally, you completed compiling  process.

Now click this icon for simulation .If you open I0.0(START) input. 30 seconds later,our motor will be loaded. Let’s do that.

S7-1200 PLC configuration,example creation,monitoring and downloaiding in the PLC.

S7-1200 PLC configuration,example creation,monitoring and downloaiding in the PLC.

First, we are choosing TIA Portal V13 from our Start Menu and double click and open the program.

Here is our portal view. Now we need to choose Create new project icon. You can change your project name also your path and you can add your comments. And click the create button.

 We completed Start section. Now we need to configure our device. First clickconfigure a device.

Choose  add  new  device. And  click  SIMATICS7-1200  CPU  its  model  and  type respectively. Your  CPU type  can  change  from  one  to  another. So  you  need  to control on your PLC Training Set. Its  CPU panel will give needed information to you. When  you   are   confident  to  select  true  choice. Click  add  button. And  go  on.

The  CPU  added. You can see at the following figure. Now  choose  Program blocks and click double Main [OB1].

Here is the LADDER diagram window. Now we are ready to add our operations such as bit logic, timer,counter,comparator etc. We will use Basic Instructions part

Its label will be START button. We will adjust its label and adress.

Click right button on mouse. And choose Define tag.

Specify your information and click the Define button. Start button’s name is I0.0

 

Do the same thing like START button with STOP button. Stop button’s name will be I0.1 This is your choice. You have no constraints on it.

Now double click Add new block. Because we need Timer for our problem.

 /////////////////////////////////////////////////////////////////////////////////////////////////////////////
Choose  Data Block. From Type, so you  can   choose whatever  you  need. And we 
 choosed  IEC_Timer. And click OK.

Our Data_block_1[DB1] is  added. Double  click Main [OB1] and  turn  back our LAD diagram.

Add TON timer relay from Basic Instructions is selected. And click unknown information on and under the timer. Our time is milisecond at our programme. You need to give attention. Also we will give its label ‘’Data_block_1’’. You can see our explanations at the following figures.

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Now we need to use Network 2.

 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Add new button. Its our timer’s output contact.

___________________________________________________________________
We will add output coil. Its label will be MOTOR.

______________________________________________________________________________

Click  right  with  Mouse  and  specify  its  properties  and  click  Define  button  again.

This icon is downloading our program to CPU. Also you know Main[OB1] is interface between PC and CPU. Click download icon and continue.

Choose PN/IE and Intel® 82579LM Gigabit Network Connection. And click theStart Search button.

Search is completed. Choose PLC_2 device and click the Load button.

Choose  Stop all  and  click Load  again. And  then  click  Finish  button. Finally, you completed compiling  process.

Now click this icon for simulation .If you open I0.0(START) input. 30 seconds later,our motor will be loaded. Let’s do that.

S7-1200 Configuration in TIA portal software.

S7-1200 Configuration in TIA portal software.

This is PLC Program for the S7-1200 PLC configuration in TIA portal software.

Problem Description:-

Write the PLC program for the S7-1200 PLC configuration in the TIA portal software.

Problem Diagram

 

////////////////////////////////////////////////////////////////////////////////////////////
Problem Solution

Open TIA portal software in the PC or laptop. Create new project in the software and take hardware from the hardware list.

Select required PLC model and save the configuration.

Program

Here is PLC program for the S7-1200 PLC configuration in the TIA portal software.

List of inputs/outputs

Inputs List:-

Outputs List:-

M memory:-

Configuration for the S7-1200 PLC in TIA portal software.

Open TIA portal software from your desktop and create new project in the software. Once project is created, select devices (controllers, HMI. PC system, Drives) from the list.

After selecting controller, select CPU. 

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Select required PLC model from the list as shown in figure (Consider here CPU 1214 
ACDCRLY)

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Select serial no of the PLC as shown in figure (available on hardware).

Select add option and save the program

Your configured CPU (PLC) is here!!

Note:-Application is only for learning and educational purpose .Above application may be different from actual application. This application can be done in other PLC also. Users are responsible for correct operation of the PLC system and for any possible injuries and or material damages resulting from the use of this program. It is necessary to take care of safety during implementation, installation, maintenance and operation.

All parameters and graphical representations considered in this example are for explanation purpose only, parameters or representation may be different in actual applications. Also all interlocks are not considered in the application.